About Krishnaraj Enterprises
Mould design, toolmaking and moulding under one roof
Krishnaraj Enterprises is an injection mould manufacturer and plastic injection moulding company in Bhosari, Pune. We design and build moulds in our own toolroom and use them to manufacture plastic components for industrial buyers.
Company overview
Who we are
Established in 2024 and led by a technical team with 20+ years of industrial experience in mould manufacturing and plastic injection moulding, Krishnaraj Enterprises is an integrated engineering partner in Bhosari, Pune.
Most of our work starts with a buyer’s drawing, 3D model or sample part. We review whether it can be moulded well, design the mould, build it in our toolroom, trial it on our own machines and then supply the moulded components on an agreed schedule.
Keeping those stages together means one team is accountable for the tool and the part. When a dimension needs correcting or a design changes, the toolmaker and the moulding team are in the same building.
Engineering approach
How we take a part from drawing to production
Engineering assessment
Review of 2D/3D part geometry, critical dimensions, draft angles, wall sections and material before any tooling decision.
Mould design
Parting line, gating, venting, cooling and ejection designed around the part and the machine it will run on.
Controlled production
Moulding with set process parameters, material drying where the polymer needs it, and in-process checks.
Inspection & dispatch
Dimensional and visual checks against your drawing, followed by packing suited to the part and the route.
Facility & infrastructure
Our manufacturing facility in Bhosari, Pune
The moulding floor, toolroom, inspection area, material store and dispatch area, photographed at our plant.
Manufacturing strength
Machines, tooling and materials
A summary of the equipment and materials behind our moulded components. For a part-specific answer (machine size, cavity count, material grade), send us the drawing.
| Established | 2024 · Led by team with 20+ years tooling & moulding experience |
|---|---|
| Clamping force | 80T to 450T (10 installed machines) |
| Moulding machines | Ten machines: nine horizontal servo-toggle (Hyundai & Zhafir) and one vertical rotary (Yuhdak) |
| Toolroom operations | In-house VMC machining, milling, surface grinding, lathe turning & die spotting; approved specialist partners for wire EDM, gun drilling & vacuum hardening |
| Tool steels | H13, P20, 1.2344, 1.2738 with certified vacuum heat treatment (48–52 HRC) |
| Polymers processed | PA6, PA66 (unfilled & GF), POM, ABS, PC, PBT, PP |
| Inspection equipment | Profile projector with DRO, granite surface plate, digital micrometers, bore gauges, plug & pin gauge sets |
| Quality systems | ISO 9001:2015 QMS, lot traceability, FAIR, PPAP support, and certificates of conformance |
Quality philosophy
Quality is designed into the tool first
Most moulding problems (sink, flash, warpage, short shots) are cheaper to prevent in the mould design than to correct on the machine. That is why our quality work starts at the drawing review and continues through first-article approval, in-process checks and pre-dispatch inspection.
Industries served
Where our components are used
Our current product ranges are used in these areas. If your industry is not listed, send the part; the moulding principles are the same.
Working with us
What buyers can expect
- A feasibility review of your drawing before we quote
- An NDA before drawings are shared, if you need one
- Samples measured against your drawing before production is released
- One contact for tooling and component supply
- Mould maintenance and modifications handled in-house
Company profile
Need our details for vendor registration?
Our company profile brings together capabilities, equipment, materials, quality records and registration details (GSTIN, Udyam and IEC) in one document for procurement and supplier evaluation.
Talk to our engineering team
Discuss your manufacturing requirement
Tooling, moulding or a complete part: tell us what you need and we will review it with you.